Industrial CCTV
Factory and Industrial CCTV in Lahore
Gate control, boundary coverage, production line visibility and a control room someone can actually work from — designed for dust, heat, long cable runs and shift patterns.
Industrial Sites Are Four Systems in One
An industrial unit in Kot Lakhpat, Quaid-e-Azam Industrial Estate or Sundar is not a bigger version of a workplace system. It is a vehicle control problem at the gate, a boundary problem along the walls, a process visibility problem on the lines, and a shift-management problem at the labour entry — usually all on one recorder platform.
That is why a factory scope starts at 32 channels and often runs well past it, and why the design work matters more than the camera brand. Cable distances alone rule out a single copper backbone on most sites, which pushes you towards distributed switches, fibre between blocks, and a properly sized recording rack.
Every item is Contact for Price. Send your covered area, block layout and gate count to WhatsApp on WhatsApp and we will arrange a survey before quoting anything.
Zones and What Each One Is For
Typical industrial coverage. The exact count comes from the survey, because block spacing and boundary length dominate the total.
| Zone | Purpose | Typical camera choice |
|---|---|---|
| Main gate and vehicle entry | Plate capture, driver identification, in and out timing | Dedicated LPR camera at a controlled speed point, plus an overview camera |
| Weighbridge | Vehicle identity matched to weight ticket | Fixed cameras on both sides of the platform with the plate in frame |
| Boundary wall and perimeter | Detect approach and climbing before entry | Fixed cameras at planned spacing, with active deterrence at weak points |
| Production lines and machine areas | Process visibility, incident review, safety follow-up | Fixed overview cameras positioned clear of steam, dust and heat sources |
| Raw material and finished goods store | Stock movement and access control | Door-facing plus internal overview, linked to the store keeper’s access |
| Utility, boiler and generator area | Restricted access and after-hours activity | Rugged fixed cameras with surge-protected outdoor runs |
| Labour entry and attendance point | Shift entry, queue management, attendance disputes | Face-height camera alongside the biometric or face attendance device |
| Yard, parking and canteen | General movement, vehicle damage, crowd points | Wide fixed cameras, with a PTZ covering the open yard |
Designing the Perimeter Properly
Perimeter coverage is where most industrial systems are either strong or quietly useless.
Spacing follows the lens, not the wall
Camera spacing is set by the useful identification distance of the lens and the available light, not by dividing the wall length into equal parts.
Infrared range is a claim, not a promise
A stated IR distance assumes clean air and a reflective subject. In Lahore dust and smog conditions, plan conservatively and verify on site at night.
PTZ plus fixed, never PTZ alone
A PTZ is looking somewhere else the moment it matters. Use fixed cameras for the record and PTZ for zooming in on what the fixed camera flagged.
Deterrence at weak points
Light and siren models at the sections of wall that back onto open ground make an approach obvious rather than silent.
Thermal for long, dark stretches
Thermal cameras detect a person by heat where there is no light at all, and suit long boundary runs. They identify presence, not faces.
Surge protection on every external run
Long outdoor cable runs on poles and walls are exposed to fluctuation and lightning. Surge devices and proper earthing at the far end are not optional here.
Cable Distance, Fibre and Where the Racks Go
On an industrial plot the distance between the gate, the blocks and the office building routinely exceeds the 100 metre copper limit several times over. The correct design is a small distributed switch cabinet near each cluster of cameras, with fibre back to the main rack, rather than heroic cable runs that fail intermittently in hot weather.
Each cabinet needs power that survives the site’s own supply changeovers, ventilation, and a lock. Where a cabinet sits in a dusty or hot area, an enclosure rated for the environment costs far less than replacing switches every season.
The main recording rack belongs in a controlled room with reliable power and reasonable temperature — not in a corner of the production hall. Recorder channel counts of 32, 64 and above are normal on industrial sites, and storage sizing should be agreed against the retention days management actually wants.
Harsh Conditions Are the Real Enemy
Industrial cameras rarely fail because of the camera. They fail at the cable entry, the junction box and the lens surface. Water gets in through a badly glanded box during monsoon. Dust and airborne fibre coat dome bubbles until images go soft. Vibration near heavy machinery loosens brackets over months.
We plan for this rather than pretending otherwise: sealed glands and quality boxes rather than a claimed IP rating alone, brackets fixed into solid structure away from vibration sources, and a scheduled clean of lenses and bubbles at least annually — more often near roads or dust-generating processes.
Where washdown, steam or chemical exposure is part of the process, tell us at survey. The mounting position and enclosure choice change completely, and it is far cheaper to decide that before installation than after the first failure.
Control Room, Video Wall and Who Is Watching
A large camera count with nobody watching is a recording archive, not a security system. Where a site runs a guard room or a security office, the display arrangement decides whether anyone actually notices something live.
That usually means a video wall or a set of large displays driven by a decoder, a keyboard controller for PTZ operation, and a sensible layout — perimeter and gates on the main view, process cameras on a secondary view, alarm pop-up for line crossing events at night. Alarms tied to human and vehicle detection filters rather than plain motion keep the operator’s attention meaningful, because a screen that flashes at every insect and every headlight gets ignored within a week.
Management and head office usually want their own view without sitting in the guard room, which is a permissions and network question covered on our remote monitoring page.
Compliance Note for Industrial Clients
One verified requirement is directly relevant to part of Lahore’s industrial base: the FBR made surveillance camera installation mandatory for textile mills with effect from 1 July 2026. If your unit falls within that scope, the camera specification, positioning and data arrangement should be confirmed against the applicable notification with your tax advisor before installation, since compliance requirements can be specific about what must be visible.
Beyond that, we are not aware of a general legal requirement for private industrial premises in Lahore to install CCTV, and we will not tell you there is one.
Book an Industrial Site Survey
Send your covered area, number of blocks, gate count and boundary length on WhatsApp, or email info@strixlink.com. Industrial systems are always Contact for Price and always quoted after a survey.
Frequently asked questions
How many cameras does an industrial unit usually need?
Thirty-two channels upwards is typical once you cover gate and vehicle control, boundary, production areas, stores, utility zones and labour entry. Boundary length is usually the biggest single driver of the count.
Can cameras read number plates at the gate?
Yes, with a dedicated LPR camera at a controlled point where vehicles slow down, at the right angle and height, with lighting planned for night. A general overview camera at a wide angle will not do it reliably, and we will not claim otherwise.
Do we need fibre on the site?
Almost always, once blocks are separated by more than about 100 metres. The standard approach is distributed switch cabinets near each camera cluster with fibre back to the main recording rack.
Are thermal cameras worth it for the boundary?
They are useful on long, unlit stretches because they detect a person by heat regardless of light. They tell you someone is there, not who it is, so they work best paired with a PTZ or fixed camera that can identify.
Is CCTV legally required for factories in Pakistan?
There is a verified requirement from the FBR that made surveillance camera installation mandatory for textile mills from 1 July 2026. Outside such specific notifications, we are not aware of a blanket legal requirement, so check what applies to your category rather than assuming.
How do you handle power fluctuation and outages on site?
The recording rack, distributed switches and internet link go on the protected supply, with surge protection at every long external run and proper earthing. Generator changeover is as hard on equipment as the outage itself.
Can head office see the site from another city?
Yes, with per-user permissions so head office sees what it should and the site security team sees the operational cameras. The practical limit is the site’s upload bandwidth, which we check during the survey.