55-inch FHD LED-DID Splicing Video Wall 3.5mm Bezel
Contact for Price
- Screen Size: 55"
- Display Resolution: 1920 × 1080
- Long lifespan >50,000 hours
- Low power consumption: 120W
- Slim design – approx. 54mm thickness
- 55-inch TFT LED panel with D-LED backlight
Need availability or technical advice? Ask on WhatsApp
Stock changes daily. Please confirm availability on WhatsApp before travelling.
- WarrantyAll Pollo Security products supplied by StrixLink carry the manufacturer warranty. Confirm the exact warranty term for your model on WhatsApp before you order.
- InstallationProfessional installation available across Lahore. Installation is quoted separately based on the number of cameras, cable runs and site conditions.
- DeliveryDelivery available across Lahore and to other cities in Pakistan. Delivery time and charges are confirmed when you place your order.
About the 55-inch FHD LED-DID Splicing Video Wall 3.5mm Bezel
Not every wall needs an invisible join. This 55-inch D-LED backlit panel carries a seam of 3.5mm or less, clearly visible up close but far less noticeable at normal viewing distance in a lobby or monitoring room. You get Full HD at 1920 x 1080, 500 cd/m2 brightness, 178 degree viewing angles and a slim 54mm depth, with HDMI, DVI, VGA, USB and CVBS inputs. CVBS in particular is useful where older analogue sources still exist. The honest limitation: signal compatibility is quoted up to 1080P, so this is not the panel for a 4K source.
Key benefits
- A seam of 3.5mm or less, at a lower entry point than ultra-narrow panels.
- CVBS and USB inputs accept legacy analogue and local media alongside HDMI and DVI.
- RS-232 with loop-out lets one control line run through the whole array.
- A 54mm body and 120W draw ease both mounting and power planning.
- Rated beyond 50,000 hours, with 178 degree viewing in both directions.
- Auto image adjustment and noise reduction help when incoming signals are imperfect.
Where it works well
- Monitoring wall for a mid-size factory in Kot Lakhpat
- Reception display wall for a school or college campus
- Shop-floor viewing wall in a wholesale market office
- Security office wall for a gated street in DHA
- Control room upgrade replacing a row of standalone monitors
Technical specifications
Manufacturer-published specifications. Confirm critical figures against the datasheet before ordering.
| Screen Size | 55" |
|---|---|
| Display Resolution | 1920 × 1080 |
Features
- 55-inch TFT LED panel with D-LED backlight
- Full HD resolution (1920 × 1080), 16:9 aspect ratio
- Ultra-narrow bezel with ≤3.5mm seam for seamless video walls
- High brightness: 500 cd/㎡ for clear indoor visibility
- Wide viewing angle: 178° / 178° (horizontal & vertical)
- Fast response time: 5ms for smooth video playback
- 16.7 million colors with 1200:1 contrast ratio
- Long lifespan >50,000 hours
- Multiple input interfaces: HDMI, DVI, VGA, USB, CVBS
- RS-232 control with loop-out for video wall management
- Multi-screen splicing & matrix joint control supported
- Auto image adjustment & noise reduction supported
- Compatible with HD & SD signals up to 1080P
- Low power consumption: 120W
- Slim design – approx. 54mm thickness
- Universal power input: AC 100–240V, 50/60Hz
Frequently asked questions
How obvious is a 3.5mm seam in practice?
Within a metre or two it reads as a thin dark grid across the image. From three or four metres, which is where control room operators normally sit, most people stop noticing it. If the wall is a branding or lobby feature that visitors stand close to, the narrower-bezel panel is the better fit.
Can I mix these with the 0.88mm class panels in one wall?
We would advise against it. The two use different panel technology and have different seam widths and rated lifespans, so the grid across the wall would look uneven and the panels would age differently. Keep a single model per wall and plan spares from the same batch.
Will it take a 4K feed?
Signal compatibility is quoted for HD and SD sources up to 1080P. A 4K source would need to be scaled down before it reaches the panel, and you gain nothing from it. If 4K input is a firm requirement, look at the higher specification splicing panel instead.
Can it run continuously?
It is an industrial splicing panel with a rated life beyond 50,000 hours and a universal AC 100 to 240V input, so it is built for extended operation rather than domestic use. What determines real-world life is ventilation and power quality, both of which are worth spending on in Lahore. Ask us about cabinet airflow and UPS sizing when you plan the room.
Need this installed in Lahore?
Send the model number on WhatsApp for the current price, availability and a full installation quote.
Specifications sourced from the Pollo Security product page: https://www.pollosecurity.com/products/pld-55pj035p-led-b-55in-fhd-video-wall-3-5mm-bezel
