BioSlim – Fingerprint Biometric Device

Q: Can it work without running a LAN cable to the door?

Yes, it has 2.4 GHz Wi-Fi built in, which is often the reason people choose it over a wired-only terminal. TCP/IP and USB host and slave ports are also available, so logs can be pulled to a flash drive if the network is down. Note that it is 2.4 GHz only, so plan the access point accordingly.

Q: Can we use cards as well as fingerprints?

Card reading is listed as an optional configuration for 125 kHz EM or 13.56 MHz Mifare, not as standard on every unit. That means it has to be specified at the time of order rather than added afterwards. Tell us on WhatsApp which card type your building already uses and we will confirm what is available.

Q: Will it survive being mounted at an outdoor factory gate?

It is designed for indoor environments and rated for operation between 0°C and 45°C. A gate position in direct Lahore sun during May and June sits outside what the unit is built for. If the entry point is outdoors, mount it inside a shaded guard cabin or ask us about a differently rated device.

Q: What happens to attendance data during a power cut?

The device has a built-in backup battery rated for two to four hours of operation, and all records are held on board up to 160,000 logs. Punches made during an outage stay on the device and sync when the network returns. It runs on a 5V DC 1A supply, so a small UPS on the adaptor is also an easy addition.

Pollo Security Model: PLB 2000 Available in Lahore

Contact for Price

Biometric Technology: Fingerprint, RFID Card, Password / PIN
User Capacity: 2,000
Connectivity: Wi-Fi
Supports multiple languages
Stores 160,000 attendance logs
Designed for indoor environments

Quantity

Get a Quote on WhatsApp Request Installation on WhatsApp

Need availability or technical advice? Ask on WhatsApp

Stock changes daily. Please confirm availability on WhatsApp before travelling.

WarrantyAll Pollo Security products supplied by StrixLink carry the manufacturer warranty. Confirm the exact warranty term for your model on WhatsApp before you order.
InstallationProfessional installation available across Lahore. Installation is quoted separately based on the number of cameras, cable runs and site conditions.
DeliveryDelivery available across Lahore and to other cities in Pakistan. Delivery time and charges are confirmed when you place your order.

About the BioSlim - Fingerprint Biometric Device

BioSlim covers the ordinary attendance job without asking for a server room. It holds 2,000 users and 160,000 logs on the device itself, completes 1:N verification in under half a second, and reaches the office network over 2.4 GHz Wi-Fi, TCP/IP or USB. The 2.4-inch colour display with voice prompts and multi-language support keeps enrolment straightforward for staff of mixed backgrounds. Two points to settle before ordering: this is an indoor unit rated for 0°C to 45°C, and RF card reading is an optional build rather than standard.

Key benefits

Holds 2,000 users and 160,000 logs on the device itself, not on a PC.
1:N verification in under half a second keeps a morning queue moving.
Built-in 2.4 GHz Wi-Fi avoids running a network cable to the door.
Backup battery rated for two to four hours covers a load-shedding slot.
FAR below 0.0001% and FRR under 1% balance security against daily frustration.
Slim 180 × 130 × 33 mm body fits a narrow doorway wall.

Where it works well

Staff entrance of a small factory unit in Kot Lakhpat
Head office reception recording attendance for a few hundred employees
Clinic or academy where a slim indoor wall unit fits
Warehouse office with Wi-Fi but no spare network drop
Distribution office needing USB log collection without IT support

Technical specifications

Manufacturer-published specifications. Confirm critical figures against the datasheet before ordering.

Biometric Technology	Fingerprint, RFID Card, Password / PIN
User Capacity	2,000
Log Capacity	160,000
Display Resolution	320 × 240
Connectivity	Wi-Fi
Power Supply	5V DC / 1A

Features

Fingerprint-based biometric attendance and access control device
Supports up to 2,000 users for employees
Stores 160,000 attendance logs
Powered by a 320 MHz CPU for stable and reliable performance
Equipped with a 2.4-inch TFT color display (320 × 240 pixels)
Supports multiple interfaces including TCP/IP and USB (Host & Slave)
Attendance modes fingerprint, card, password
Fast verification speed of less than 0.5 seconds (1:N)
Low False Rejection Rate (FRR < 1%) for smooth user experience
Extremely low False Acceptance Rate (FAR < 0.0001%) for high security
Provides 16-bit Hi-Fi voice prompts and sound indications
Supports multiple languages
Operates on 5V DC / 1A power supply
Built-in backup battery providing 2–4 hours
Compact and slim design with dimensions 180 × 130 × 33 mm
Lightweight construction with a total weight of 0.45 kg
Designed for indoor environments
Support 2.4GHz Wi-Fi connectivity
Operating temperature 0°C to 45°C
Optional support for RF cards (125kHz EM / 13.56MHz Mifare)

Frequently asked questions

Can it work without running a LAN cable to the door?

Yes, it has 2.4 GHz Wi-Fi built in, which is often the reason people choose it over a wired-only terminal. TCP/IP and USB host and slave ports are also available, so logs can be pulled to a flash drive if the network is down. Note that it is 2.4 GHz only, so plan the access point accordingly.

Can we use cards as well as fingerprints?

Card reading is listed as an optional configuration for 125 kHz EM or 13.56 MHz Mifare, not as standard on every unit. That means it has to be specified at the time of order rather than added afterwards. Tell us on WhatsApp which card type your building already uses and we will confirm what is available.

Will it survive being mounted at an outdoor factory gate?

It is designed for indoor environments and rated for operation between 0°C and 45°C. A gate position in direct Lahore sun during May and June sits outside what the unit is built for. If the entry point is outdoors, mount it inside a shaded guard cabin or ask us about a differently rated device.

What happens to attendance data during a power cut?

The device has a built-in backup battery rated for two to four hours of operation, and all records are held on board up to 160,000 logs. Punches made during an outage stay on the device and sync when the network returns. It runs on a 5V DC 1A supply, so a small UPS on the adaptor is also an easy addition.